Factory Capability for Solar Mounting Systems
Easy Solar supports B2B PV mounting orders from component processing and system matching through inspection, project packing and export preparation. This page focuses on what is manufactured and how orders move through the factory.
- Aluminum Profile Processing
- Cutting / Drilling / Punching
- Component Matching
- Quality Inspection
- Project Packaging
PV Racking Components Prepared for Project Supply
The factory page now stays focused on component and order capability instead of re-explaining every buyer type and every product application.
Aluminum Rails & Profiles
Profile preparation and order-based cutting for compatible roof, ground and other PV mounting assemblies.
Brackets & Connection Parts
Project-specific brackets, adapters and connection hardware prepared to the confirmed component specification.
Clamps, Hooks & Fasteners
Module clamps, roof hooks, fasteners, grounding parts and related accessories matched to the required system BOM.
Project Component Sets
Rails and hardware can be organized into project-based or kit-based component sets for packing and shipment.
Profile and Component Processing for Confirmed Orders
The current factory information supports aluminum profile processing together with cutting, drilling, punching, component preparation and selected pre-assembly. These capabilities are more useful when tied to an approved product model or drawing.
- Cut profiles to the confirmed order length.
- Drill or punch holes according to product or drawing requirements.
- Prepare brackets, clamps, hooks, fasteners and grounding parts as matched component sets.
- Use selected pre-assembly where it reduces site work or packing errors.
From Order Confirmation to Export Preparation
One production flow replaces the previous repeated capability, process and workshop descriptions.
Review Requirements
Confirm product family, drawing, module or system interface, quantity, packaging and delivery requirements.
Confirm BOM & Drawings
Finalize rail lengths, brackets, clamps, fasteners, custom parts and any order-specific processing details.
Process Components
Arrange cutting, drilling, punching, component preparation and selected pre-assembly for the confirmed order.
Inspect & Pack
Check dimensions, surface condition, quantities, component matching, labels and packing completeness.
Prepare Shipment
Organize cartons, pallets, shipping marks, packing lists and export-shipment preparation.
Production, Component Preparation and Packing
Real workshop and order-preparation images should carry this section. Add verified equipment or capacity data here later only when you can document it.
Profile Processing
Use close-up factory photography that clearly shows actual cutting, drilling or punching work.
Component Matching
Show rails and small hardware together as a real order or system BOM rather than as generic product decoration.
Order Packing
Show cartons, pallets, labels or completed order preparation that demonstrates real export handling.
Key Checks Before Packing and Shipment
This page keeps only the factory-level summary. Detailed inspection methods belong on the dedicated Quality Control capability page.
Material & Component Check
Review the required profile, fastener and component type against the confirmed order configuration.
Dimension Check
Check key profile lengths, hole positions, bracket dimensions and component fit before packing.
Surface Review
Review visible surface condition and obvious deformation or damage on finished mounting components.
Packing Verification
Confirm quantities, accessory matching, labels, cartons and pallets before shipment preparation.
Custom Supply Without Duplicating the OEM Capability Page
Selected orders can include custom brackets, rail lengths, private-label cartons, labels, manuals or kit configuration. Detailed tooling, sample, packaging and version-control discussions should stay on the dedicated OEM / ODM page.
- Drawing-based or project-specific component customization
- Private-label carton and product labels
- Installation manuals and distributor-oriented kit packing
- Order-specific component grouping where applicable
Mounting Systems and Components Supplied from the Factory
Keep this as a short navigation layer rather than repeating application-level SEO copy.
Agrivoltaic Mounting
Agricultural PV structures and related mounting components.
View Agrivoltaic Mounting →Information Needed for Factory Review and Quotation
One concise input table replaces repeated quotation instructions across multiple sections.
| Product / Project | Required system or component family, project type and any reference model or drawing. |
|---|---|
| PV Module | Panel dimensions, frame thickness, layout/orientation and approximate module quantity where relevant. |
| Site / Interface | Roof type, ground/foundation condition, parking layout, railing condition or other installation interface. |
| Engineering Inputs | Wind/snow design information or local structural requirements if available. |
| Customization | Custom dimensions, bracket drawings, labels, cartons, manuals or private-label requirements. |
| Order & Delivery | Estimated quantity, destination, packing preference and target delivery schedule. |
Request Factory Capability Details or a Project Quote
Send the product family, drawing or project inputs. Easy Solar can review the component scope, customization, packing and quotation requirements.
- Product or system category
- Drawing / module / site information
- Customization requirements
- Estimated order quantity
- Packaging and delivery destination
Factory Capability Questions
Only questions that add information beyond the main sections are kept.
Can I send a drawing or existing component for review?
Yes. A drawing, reference model or clear component photos can be used to discuss processing, matching and quotation requirements.
Can components be packed as project kits?
Selected rails, brackets, clamps, fasteners and related accessories can be grouped according to the confirmed BOM and packing plan.
What factory information should I verify before placing an order?
Ask for the production capability relevant to your component, actual workshop or process evidence, quality-control scope, approved drawings/BOM, packing details and delivery plan.