Solar Mounting Systems for Installers
Share the roof or site type, module dimensions, layout and project quantity. Easy Solar can help match the mounting components, prepare a bill of materials and packing list, and quote a suitable roof, ground or balcony mounting configuration.
- Roof-specific component matching
- Selected pre-assembled parts
- BOM & packing-list support
- Installation documents where applicable
Start with the roof or site condition
The mounting method should be selected from the installation surface and structural conditions first—not from a generic kit name. Use the relevant system page as the starting point.
Roof systems
Options for metal, tile, pitched and flat roofs, including rail, clamp, hanger-bolt and selected ballasted configurations.
Explore roof systems →Ground systems
Fixed-tilt structures and foundation options for open land and small-to-large ground-mounted PV projects.
Explore ground systems →Balcony systems
Compact mounting options for selected balcony and small distributed PV applications.
Explore balcony systems →Rails, clamps & hardware
Source compatible rails, module clamps, hooks, L feet, hanger bolts, fasteners, grounding parts and related mounting hardware.
Explore accessories →
Send the details that affect the mounting configuration
A useful quote needs enough project information to avoid guessing. If some values are not available yet, send what you have and identify what still needs confirmation.
- Roof or site type, roof profile/material, and supporting structure where known
- PV module length, width, frame height and quantity
- Module orientation, array layout and preferred tilt where relevant
- Attachment constraints, waterproofing needs or penetration preference
- Project wind and snow design loads when available
- Required components, order quantity and delivery destination
Support focused on preparation before the crew reaches site
The goal is to confirm compatible components and make the order easier to check, stage and install. Support varies by system and order scope.
Rails, clamps, hooks, brackets, fasteners and related parts can be matched to the confirmed application and module details.
Some clamps, brackets or accessory sets can be supplied pre-assembled when the selected system and order requirements allow it.
Component lists, basic installation documents, reference drawings and packing information can be provided where applicable.
Confirmed orders can be organized with packing lists and labeling options to make receiving and material checking more straightforward.
From project information to a confirmed component set
Keep the process simple: identify the application, confirm the required hardware, review the BOM and then finalize packing and delivery details.
Review the application
Confirm roof/site type, module data, layout and the main design constraints.
Match the system
Select the attachment method, rails, clamps and related hardware for the confirmed conditions.
Review BOM & quote
Check component scope, quantities, optional parts, packing requirements and commercial terms.
Pack for delivery
Prepare the confirmed components, labels and packing information for shipment.
Check the system, calculate a starting point, or review supply capability
Solar Mounting Calculator
Use the calculator for a preliminary mounting direction based on project location, surface and module information.
Open calculator →Factory Capability
Review manufacturing and order-support information before discussing repeat purchasing or project quantities.
View capability →Quality Control
Review the site’s published quality-control information for mounting components and order inspection.
View quality control →Send the roof or site details and module information
Include the project quantity, module dimensions, layout, installation surface, destination and any wind or snow requirements you already have. The quotation can then be based on a defined component scope rather than a generic kit.
Common installer questions
What information should I send for a mounting quote?
Send the roof or site type, module dimensions and quantity, layout or orientation, required components, delivery destination and available wind or snow design information. Photos or drawings are useful when the roof profile or attachment condition needs clarification.
Can you match mounting hardware to different roof types?
Yes. Component selection can be reviewed for common metal, tile, pitched and flat-roof applications. The final attachment method depends on the actual roof profile, supporting structure, waterproofing requirements and project loads.
Can mounting parts be supplied pre-assembled?
Selected clamps, brackets or accessory sets can be pre-assembled when the system design and order scope allow it. Confirm the required level of pre-assembly during quotation.
What documents can be supplied with an order?
Depending on the system, support can include a component list, basic installation documentation, reference drawings and packing information. Ask which documents are available for the specific configuration you are ordering.
Can installers order mounting accessories separately?
Rails, clamps, roof hooks, L feet, hanger bolts, fasteners, grounding parts and other compatible accessories can be quoted separately according to the required specification, quantity and availability.