Indonesia Project Reference

Indonesia 16-Panel Solar Roof Mounting Project

This project reference shows a 16-module rooftop array arranged in two rows of eight. The available drawing records the array geometry, rail layout and adjustable L-foot attachment spacing used for the mounting plan.

Discuss a Similar Project View Roof Systems

Indonesia rooftop project reference with a 16-module PV array

16Modules

2 × 8Array layout

IndonesiaProject location

Project Facts

Documented Layout and Rail Dimensions

The figures below are taken from the project information shown on the page. Module wattage and total system capacity are not stated, so they are intentionally not estimated.

16PV modules

2 × 8Module layout

4Rail lines

8,076 mmArray width shown

8,400 mmRail run shown

Capacity not stated: because the module wattage is not provided in the available project information, this page does not claim a kW or kWp value.

Mounting Configuration

Rail-Based Roof Attachment Concept

The mounting path shown on the project drawing runs from the supporting roof structure through the L-foot and rail assembly to the module clamps and frame.

Roof Structure→ L Foot→ Mounting Rail→ Mid / End Clamp→ PV Module Frame

Adjustable L-foot spacing

The drawing marks the L-foot distance at approximately 1,000 mm and identifies the spacing as adjustable. Final attachment positions should match the actual roof support locations and project load requirements.

L-foot attachment detail used in the roof mounting layout

Rail and clamp connection

Four rail lines support the two module rows. The rail, clamp and module-frame interfaces should be checked together so component compatibility is maintained across the final layout.

Installation Review

Information to Confirm Before Using a Similar Layout

This case is a project reference, not a universal installation specification. A new roof should be reviewed against its own structure, module data and design loads.

Roof interface and mounting assembly detail

Project-detail image showing the roof interface and mounting assembly.

Inputs for project-specific review

Roof: material, profile and pitch
Structure: purlin or rafter position
Modules: dimensions and clamp zones
Rails: span and splice arrangement
Loads: wind, snow and local design basis
Waterproofing: sealing and penetration detail

Do not copy spacing blindlyThe shown L-foot spacing is a reference from this layout, not a fixed value for every roof.

Confirm structural supportAttachment points should transfer loads into suitable roof structure, not rely on the roof covering alone.

Recheck after module changesDifferent module dimensions or clamp zones can change rail positions, spans and hardware quantities.

Need a Roof Mounting Layout for Your Project?

Send the roof profile, module datasheet, support spacing, proposed module layout and available design-load information. Easy Solar can review the mounting configuration and component requirements for the project.

Send Project Details Roof Mounting Options

Related Resources